Tutorial - How to Sew a Patch
Although most patches on the market are iron-on's, there are many advantages to sewing your patches on to your fabric. If you have a fabric with some stretch to it, your patch will over time start to lift up at the edges, and will eventually fall out.
Given the going rate of patches, I know I don't want to lose the equivalent on three normal coffees (or one fancy) because your fabric is stretchy. There are also some fabric that will melt if you try to iron them, like the fleece which is the surface that I'm going to sew my pizza patch on too. I also made a video tutorial on how to sew a patch.
Needles: Your best option is to get needles designed for heavy materials and have a pointed tip. This will make it easier to sew your patch without much overexertion, or possibly breaking your needle.
Thread: Usually you can get needles and thread as part of a sewing kit. However, that thread may not be the strongest. If you can, try to get some nylon or polyester thread since it is stronger than cotton thread. Regardless, you should try to get it in the colors of your patches that way it will look as seamless as possible.
Sewing or Safety Pins: This helps to make sure that nothing moves around as your sewing. If you have already ironed on your patch and just want to sew it in place for more security, you don't need these.
Thimble (optional): Yeah, that thing in your Monopoly set actually has a purpose. It is so you can push your needle through your fabric without hurting or stabbing your fingers.
1) Figure out where you want your patch to go. I have a patch blanket that I sew all of my patches too. My roommate got me this awesome pizza patch and I decided that it fits nicely beside the slope of an old girl guides patch. If you have an iron-on patch (if it has plastic shiny back its most likely an iron on), iron it into place. Most iron-on patches are not very permanent and they will start to peel off in no time. Cottons are easy to iron on but felts or blanket fabrics are not.
If cannot iron your patch, you will have to pin it into place with either safety pins or sewing pins.
2) Cut your thread. You do not want to cut it too long or you will get it in knots as your trying to work. Just over a foot (0.3 m) will be a good length. If you are sewing a really big patch, you will have to sew it on in stages. If you are using really flimsy thread, I recommend doubling up to give it some extra strength, so it does not break on you.
3) Tie a knot on the end. It seems really obvious but I know people that have sewed a bunch of patches and forgot to knot them and they fell off. Make sure that the knot is bigger when the thickness of your needle or it will pop through your fabric when you try to sew it. In the video on this post, I show you how to make a really quick and easy knot.
4) Now the fun begins. With the right side facing you, poke your needle into the edge of where your patch will sit, into the wrong side of the fabric. You'll want to make sure your knot will be hidden by the patch.
From the wrong side of the fabric, poke the needle back into the fabric and into the edge of the patch and pull.
The knot you made will be on the right side of the fabric but as you sew, it will be covered by your patch, making the wrong side of your fabric look nicer.
5) Poke your needle through the patch, a few millimetres (~1/8") from where you poked through, bring your needle back through the patch and fabric. Bam! You've made yourself a stitch. On the wrong side of the fabric poke your needle through the fabric and patch a few millimetres (~1/8") from the previous stitch.
Here is a close up of the patch after a few stitches. I tried to make sure that my stitches were in the brown outline of the pizza to make them as invisible as possible. It's good to keep your stitches as small and even as possible.
As you pull your thread make sure you do not get knots or bunching as you see here.
You may get caught up in the look of the right side of your fabric but make sure you check on the wrong side of your work to ensure it looks alright.
6) Now continue with your stitches around the patch until you get back to where you started. Try to keep your stitches as even and as small as possible. It will look nicer, but smaller stitches require more time sewing.
7) Knot the thread as closely to the fabric on the wrong side as possible and cut off the rest.
On the wrong side of fabric poke your needle as shown above and wrap your thread around it and pull your needle through, making a knot.
Cut away the extra thread and you done!
Now you know how to sew a patch, do and decorate all of your belongings with patches.
If you have any questions, you can put them in the comments below.